From 507e8bfac91e3e0ed5503036e0d6da8baf60cfa9 Mon Sep 17 00:00:00 2001
From: Alexander Alashkin <alexander.alashkin@cesanta.com>
Date: Mon, 30 Jan 2017 09:28:31 +0000
Subject: [PATCH] Drop Arduino support
PUBLISHED_FROM=85768c0d2536d9c31885a5127710b9756e3229a3
---
examples/arduino_restful_client/Makefile | 2 -
examples/arduino_restful_client/README.md | 46 ------
.../arduino_restful_client.ino | 141 ------------------
examples/arduino_restful_server/Makefile | 2 -
examples/arduino_restful_server/README.md | 45 ------
.../arduino_restful_server.ino | 133 -----------------
6 files changed, 369 deletions(-)
delete mode 100644 examples/arduino_restful_client/Makefile
delete mode 100644 examples/arduino_restful_client/README.md
delete mode 100644 examples/arduino_restful_client/arduino_restful_client.ino
delete mode 100644 examples/arduino_restful_server/Makefile
delete mode 100644 examples/arduino_restful_server/README.md
delete mode 100644 examples/arduino_restful_server/arduino_restful_server.ino
diff --git a/examples/arduino_restful_client/Makefile b/examples/arduino_restful_client/Makefile
deleted file mode 100644
index b460beef2..000000000
--- a/examples/arduino_restful_client/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# This "makefile" is only intended to prevent errors during main makefile execution
-all:
diff --git a/examples/arduino_restful_client/README.md b/examples/arduino_restful_client/README.md
deleted file mode 100644
index 597470db3..000000000
--- a/examples/arduino_restful_client/README.md
+++ /dev/null
@@ -1,46 +0,0 @@
-# Arduino Restful Client
-
-This example demonstrates how to use [Mongoose](https://www.cesanta.com/mongoose) to send HTTP commands from Arduino.
-
-Example sends free memory size and current board uptime, but it can be modified to send any user-specific data.
-
-At the moment this example supports [Arduino Mega 2560](http://arduino.cc/en/Main/ArduinoBoardMega2560) board (and compatible) with either W5100-based
-network shield (like [Arduino Ethernet Shield](http://arduino.cc/en/Main/ArduinoEthernetShield)) or [CC3000](http://www.ti.com/product/cc3000)-based WIFI Shield.
-
-## Build and run instructions:
-
-###To run with Arduino Ethernet (W5100) shield:
-1. Add (Sketch->Add file...) the following files to sketch:
- - /mongoose/mongoose.h
- - /mongoose/mongoose.c
- - /mongoose/platforms/arduino_ethernet_W5100/avrsupport.h
- - /mongoose/platforms/arduino_ethernet_W5100/avrsupport.cpp
-3. Buils and start (in console) /Users/alex/Projects/mongoose/examples/restful_server example
-4. Make `board_ip` and `board_mac` variables suitable for your network and board
-5. Change IP address in `s_target_address` variable to IP address of host running restful_server
-6. Uncomment line `#include <Ethernet.h>`
-7. Compile and flash sketch
-8. restful_server will start to show current uptime and free memory size (with 5 seconds interval)
-
-###To run with Adafruit WiFi (CC3000) shield:
-1. Add (Sketch->Add files...) the following files to sketch:
- - /mongoose/mongoose.h
- - /mongoose/mongoose.c
- - /mongoose/platforms/arduino_ethernet_W5100/avrsupport.h
- - /mongoose/platforms/arduino_ethernet_W5100/avrsupport.cpp
-2. Import Adafruit CC3000 library for mongoose
- (select Sketch->Import Library...->Add library... and point
- /mongoose/platforms/arduino_wifi_CC3000/adafruit_CC3000_lib_mongoose folder)
-3. Buils and start (in console) /Users/alex/Projects/mongoose/examples/restful_server example
-4. Make the following variables suitable for your network
- - `board_ip`
- - `subnet_mask`
- - `gateway`
- - `dns`
- - `wlan_ssid`
- - `wlan_pwd`
- - `wlan_security`
-5. Change IP address in `s_target_address` variable to IP address of host running restful_server
-6. Uncomment line `#include <Adafruit_CC3000.h>`
-8. Compile and flash sketch
-9. restful_server will start to show current uptime and free memory size (with 5 seconds interval)
diff --git a/examples/arduino_restful_client/arduino_restful_client.ino b/examples/arduino_restful_client/arduino_restful_client.ino
deleted file mode 100644
index 3169eee5e..000000000
--- a/examples/arduino_restful_client/arduino_restful_client.ino
+++ /dev/null
@@ -1,141 +0,0 @@
-
-/*
- * Copyright (c) 2015 Cesanta Software Limited
- * All rights reserved
- *
- * Build and run instructions:
- * To run with Arduino Ethernet (W5100) shield:
- * -----------------------------------------------------------
- * 1. Add (Sketch->Add file...) the following files to sketch:
- * - /mongoose/mongoose.h
- * - /mongoose/mongoose.c
- * - /mongoose/platforms/arduino_ethernet_W5100/avrsupport.h
- * - /mongoose/platforms/arduino_ethernet_W5100/avrsupport.cpp
- * 2. Buils and run in console /Users/alex/Projects/mongoose/examples/restful_server example
- * 3. Make board_ip and board_mac variables suitable for your network and board
- * 4. Uncomment line #include <Ethernet.h>
- * 5. Change IP address in s_target_address variable to IP address of host running restful_server
- * 6. Compile & flash sketch
- * 7. restful_server server will start to show current uptime and free memory size (with 5 second interval)
- *
- * To run with Adafruit WiFi (CC3000) shield:
- * -----------------------------------------------------------
- * 1. Add (Sketch->Add files...) the following files to sketch:
- * - /mongoose/mongoose.h
- * - /mongoose/mongoose.c
- * - /mongoose/platforms/arduino_ethernet_W5100/avrsupport.h
- * - /mongoose/platforms/arduino_ethernet_W5100/avrsupport.cpp
- * 2. Import Adafruit CC3000 library for mongoose (select Sketch->Import Library...->Add library... and point
- * /mongoose/platforms/arduino_wifi_CC3000/adafruit_CC3000_lib_mongoose folder
- * 3. Buils and run in console /Users/alex/Projects/mongoose/examples/restful_server example
- * 4. Make the following variables suitable for your network
- * - board_ip
- * - subnet_mask
- * - gateway
- * - dns
- * - wlan_ssid
- * - wlan_pwd
- * - wlan_security
- * 5. Uncomment line #include <Adafruit_CC3000.h>
- * 6. Compile & flash sketch
- * 7. restful_server server will start to show current uptime and free memory size (with 5 second interval) *
- *
- */
-
-
-//#include <Ethernet.h>
-//#include <Adafruit_CC3000.h>
-#include <SPI.h>
-#include "mongoose.h"
-
-// CHANGE THESE VARIABLES
-// NB: Devices with the same address must not end up on the same network.
-// Use MAC address provided by device manufacturer (e.g. on a sticker).
-// If there isn't one, use a random one from the locally administered range.
-// See http://en.wikipedia.org/wiki/MAC_address for details.
-static uint8_t board_mac[] = {
- 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED
-};
-static uint8_t board_ip[] = {192, 168, 10, 177};
-
-#ifdef WIFI_CC3000
-static uint8_t subnet_mask[] = {255, 255, 255, 0};
-static uint8_t gateway[] = {192, 168, 10, 254};
-static uint8_t dns_ip[] = {192, 168, 10, 254};
-
-static const char *wlan_ssid = "mynetwork";
-static const char *wlan_pwd = "mypassword";
-static int wlan_security = WLAN_SEC_WPA2;
-#endif
-
-static const char *s_target_address = "192.168.10.3:8000";
-
-/////////////////////////////////////////////
-
-static const char *s_request = "/printcontent";
-
-static uint32_t IP2U32(uint8_t* iparr) {
- return ((uint32_t)iparr[0] << 24) | ((uint32_t)iparr[1] << 16) | (iparr[2] << 8) | (iparr[3]);
-}
-
-static int get_data_to_send(char* buf, int buf_size) {
- // Adding data to send
- // It could be any sensor data, now just put uptime & free memory size here
- return snprintf(buf, buf_size, "Uptime: %lus Free memory: %db",
- millis()/1000, get_freememsize());
-}
-static void rfc_ev_handler(struct mg_connection *nc, int ev, void *ev_data) {
- int connect_status;
-
- switch (ev) {
- case NS_CONNECT:
- connect_status = * (int *) ev_data;
-
- if (connect_status == 0) {
- char buf[100];
- int len = get_data_to_send(buf, sizeof(buf));
- mg_printf(nc, "POST %s HTTP/1.0\r\nHost: %s\r\nContent-Lenght: %d"
- "\r\n\r\n%s", s_request, s_target_address, len, buf);
- nc->flags |= MG_F_SEND_AND_CLOSE;
- } else {
- nc->flags |= MG_F_CLOSE_IMMEDIATELY;
- }
- break;
- default:
- break;
- }
-}
-
-static struct mg_mgr mgr;
-static struct mg_connection *nc;
-
-void setup()
-{
- Serial.begin(9600);
- Serial.println("Initialization...");
-#if defined(ETHERNET_W5100)
- avr_netinit(board_mac, board_ip);
-#elif defined(WIFI_CC3000)
- if (avr_netinit(wlan_ssid, wlan_pwd, wlan_security, IP2U32(board_ip),
- IP2U32(subnet_mask), IP2U32(gateway), IP2U32(dns_ip)) != 0) {
- Serial.println("Initialization error, check network settings");
- return;
- };
-#endif
-
- mg_mgr_init(&mgr, NULL);
- Serial.println("Initialization done");
-}
-
-void loop() {
- nc = mg_connect(&mgr, s_target_address, rfc_ev_handler);
- if (nc != NULL) {
- mg_set_protocol_http_websocket(nc);
- }
-
- uint32_t time_to_finish = millis() + 5000;
- while (millis() < time_to_finish) {
- mg_mgr_poll(&mgr, 1000);
- }
-}
-
diff --git a/examples/arduino_restful_server/Makefile b/examples/arduino_restful_server/Makefile
deleted file mode 100644
index b460beef2..000000000
--- a/examples/arduino_restful_server/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# This "makefile" is only intended to prevent errors during main makefile execution
-all:
diff --git a/examples/arduino_restful_server/README.md b/examples/arduino_restful_server/README.md
deleted file mode 100644
index b529c5f2f..000000000
--- a/examples/arduino_restful_server/README.md
+++ /dev/null
@@ -1,45 +0,0 @@
-# Arduino Restful Server
-
-This example demonstrates how to use [Mongoose](https://www.cesanta.com/mongoose) to control Arduino
-using HTTP requests.
-Example just blinks by LED when Mongoose receives HTTP command, but it can be modified to execute any user-specific code.
-
-At the moment this example supports [Arduino Mega 2560](http://arduino.cc/en/Main/ArduinoBoardMega2560) board (and compatible) with either W5100-based
-network shield (like [Arduino Ethernet Shield](http://arduino.cc/en/Main/ArduinoEthernetShield)) or [CC3000](http://www.ti.com/product/cc3000)-based WIFI Shield.
-
-## Build and run instructions:
-
-###To run with Arduino Ethernet (W5100) shield:
-1. Add (Sketch->Add file...) the following files to sketch:
- - /mongoose/mongoose.h
- - /mongoose/mongoose.c
- - /mongoose/platforms/arduino_ethernet_W5100/avrsupport.h
- - /mongoose/platforms/arduino_ethernet_W5100/avrsupport.cpp
-2. Make `board_ip` and `board_mac` variables suitable for your network and board
-3. Uncomment line `#include <Ethernet.h>`
-4. Compile and flash sketch
-5. Run `curl http://<board_ip/blink`
- LED attached to PIN 13 will blink and board free memory size and board uptime will be displayed.
-
-
-###To run with Adafruit WiFi (CC3000) shield:
-1. Add (Sketch->Add files...) the following files to sketch:
- - /mongoose/mongoose.h
- - /mongoose/mongoose.c
- - /mongoose/platforms/arduino_ethernet_W5100/avrsupport.h
- - /mongoose/platforms/arduino_ethernet_W5100/avrsupport.cpp
-2. Import Adafruit CC3000 library for mongoose
- (select Sketch->Import Library...->Add library... and point
- /mongoose/platforms/arduino_wifi_CC3000/adafruit_CC3000_lib_mongoose folder)
-3. Make the following variables suitable for your network
- - `board_ip`
- - `subnet_mask`
- - `gateway`
- - `dns`
- - `wlan_ssid`
- - `wlan_pwd`
- - `wlan_security`
-5. Uncomment line `#include <Adafruit_CC3000.h>`
-4. Compile and flash sketch
-5. Run curl `http://<board_ip/blink`
- LED attached to PIN 13 will blink and board free memory size and board uptime will be displayed.
diff --git a/examples/arduino_restful_server/arduino_restful_server.ino b/examples/arduino_restful_server/arduino_restful_server.ino
deleted file mode 100644
index 05301352b..000000000
--- a/examples/arduino_restful_server/arduino_restful_server.ino
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Copyright (c) 2015 Cesanta Software Limited
- * All rights reserved
- *
- * Build and run instructions:
- * To run with Arduino Ethernet (W5100) shield:
- * -----------------------------------------------------------
- * 1. Add (Sketch->Add file...) the following files to sketch:
- * - /mongoose/mongoose.h
- * - /mongoose/mongoose.c
- * - /mongoose/platforms/arduino_ethernet_W5100/avrsupport.h
- * - /mongoose/platforms/arduino_ethernet_W5100/avrsupport.cpp
- * 2. Make board_ip and board_mac variables suitable for your network and board
- * 3. Uncomment line #include <Ethernet.h>
- * 4. Compile & flash sketch
- * 5. Run curl http://<board_ip/blink
- * LED attached to PIN 13 will blink and board free memory size and uptime will responsed
- *
- * To run with Adafruit WiFi (CC3000) shield:
- * -----------------------------------------------------------
- * 1. Add (Sketch->Add files...) the following files to sketch:
- * - /mongoose/mongoose.h
- * - /mongoose/mongoose.c
- * - /mongoose/platforms/arduino_ethernet_W5100/avrsupport.h
- * - /mongoose/platforms/arduino_ethernet_W5100/avrsupport.cpp
- * 2. Import Adafruit CC3000 library for mongoose (select Sketch->Import Library...->Add library... and point
- * /mongoose/platforms/arduino_wifi_CC3000/adafruit_CC3000_lib_mongoose folder
- * 3. Make the following variables suitable for your network
- * - board_ip
- * - subnet_mask
- * - gateway
- * - dns
- * - wlan_ssid
- * - wlan_pwd
- * - wlan_security
- * 5. Uncomment line #include <Adafruit_CC3000.h>
- * 4. Compile & flash sketch
- * 5. Run curl http://<board_ip/blink
- * LED attached to PIN 13 will blink and board free memory size and uptime will responsed
- *
- */
-
-//#include <Ethernet.h>
-//#include <Adafruit_CC3000.h>
-#include <SPI.h>
-#include "mongoose.h"
-
-// CHANGE THESE VARIABLES
-// NB: Devices with the same address must not end up on the same network.
-// Use MAC address provided by device manufacturer (e.g. on a sticker).
-// If there isn't one, use a random one from the locally administered range.
-// See http://en.wikipedia.org/wiki/MAC_address for details.
-static uint8_t board_mac[] = {
- 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED
-};
-
-static uint8_t board_ip[] = {192, 168, 10, 8};
-
-#ifdef WIFI_CC3000
-static uint8_t subnet_mask[] = {255, 255, 255, 0};
-static uint8_t gateway[] = {192, 168, 10, 254};
-static uint8_t dns_ip[] = {192, 168, 10, 254};
-
-static const char *wlan_ssid = "mynetwork";
-static const char *wlan_pwd = "mypassword";
-static int wlan_security = WLAN_SEC_WPA2;
-#endif
-
-///////////////////////////////////////////////
-
-static const char *s_http_port = "60000";
-
-static uint32_t IP2U32(uint8_t* iparr) {
- return ((uint32_t)iparr[0] << 24) | ((uint32_t)iparr[1] << 16) | (iparr[2] << 8) | (iparr[3]);
-}
-
-static void rfs_ev_handler(struct mg_connection *nc, int ev, void *ev_data) {
- struct http_message *hm = (struct http_message *) ev_data;
- char buf[100];
- int clen;
-
- switch (ev) {
- case NS_HTTP_REQUEST:
- if (mg_vcmp(&hm->uri, "/blink") == 0) {
- blink(1, 500);
- }
-
- clen = snprintf(buf, sizeof(buf),
- "Free memory size: %d Uptime: %d",
- (int)get_freememsize(), (int)time(NULL));
-
- mg_printf_http_chunk(nc, "HTTP/1.1 200 OK\r\n"
- "Content-Length: %d\r\n"
- "Transfer-Encoding: chunked\r\n\r\n"
- "%s",
- clen, buf);
-
- mg_send_http_chunk(nc, "", 0);
- break;
- case NS_SEND:
- nc->flags |= MG_F_CLOSE_IMMEDIATELY;
- break;
-
- default:
- break;
- }
-}
-
-static struct mg_connection *nc;
-static struct mg_mgr mgr;
-
-void setup() {
- Serial.begin(9600);
- Serial.println("Initialization...");
-#if defined(ETHERNET_W5100)
- avr_netinit(board_mac, board_ip);
-#elif defined(WIFI_CC3000)
- if (avr_netinit(wlan_ssid, wlan_pwd, wlan_security, IP2U32(board_ip),
- IP2U32(subnet_mask), IP2U32(gateway), IP2U32(dns_ip)) != 0) {
- Serial.println("Initialization error, check network settings");
- return;
- };
-#endif
-
- mg_mgr_init(&mgr, NULL);
- nc = mg_bind(&mgr, s_http_port, rfs_ev_handler);
- mg_set_protocol_http_websocket(nc);
- Serial.println("Initialization done");
-}
-
-void loop() {
- mg_mgr_poll(&mgr, 1000);
-}
--
GitLab